A smarter approach to
A single power-flush will remove an average of 3 kg of sludge and other deposits from an ageing heating system. Where the system has incorrectly arranged cold feed and vent pipe, or where no inhibitor has previously been added, anything up to 7 kg of sludge can be removed. In one case, more than 6 kg of wet sludge was removed from a seven-radiator open-vented system.
Produced by the manufacturers of the award winning MagnaClean® Professional filter, the MagnaCleanse RapidFlush Filter has five times the capacity and is designed to remove virtually all suspended iron oxide particles and debris in one pass. What enters the filter is retained and prevented from re-circulating.
The robust filter consists of a unique swirl chamber, in the centre of which sits a powerful magnetic core. The contaminated water returning from the system during a power-flush is forced around and along the length of the magnet where any oxide particles are exposed to the powerful magnetic field.
Particles are drawn towards the core and prevented from circulating back into the system. This continues until a saturation level is reached at which point no more build-up is possible.
Crucially, this saturation point is achieved before the unit is full, allowing full and free circulation of the system at all times – Unlike typical Y-strainer filters which clog up and experience a dramatic reduction in flow performance.
The MagnaCleanse RapidFlush Filter has two chambers in series, each with a 300 mm magnet. This ensures that all returning water is exposed to a powerful 600 mm of continuous magnetic field.
There are no running costs. Once purchased, the MagnaCleanse RapidFlush Filter not only demonstrates to your customers the immediate benefits of system flushing, it also has the potential to deliver a financial return in time saving and referrals from satisfied customers.