MagnaClean Professional is suitable for all central heating systems and can be fitted anywhere on the main heating circuit. In order to achieve the best protection for the boiler, it is recommended that MagnaClean Professional is fitted between the last radiator and the boiler (see diagram overleaf). In determining a suitable location for installation, it is important to allow adequate access for servicing.

The inlet and outlet on MagnaClean Professional are reversible and there is no flow restriction.

If the flow enters the bottom inlet, both louvre triangles should point to the sheath stem. If the flow enters the top inlet, both louvre triangles should point away from the sheath stem.

MagnaClean Professional can be fitted in any orientation. Each isolation valve can rotate through 360° making it possible to install in a vertical position on horizontal pipework.

MagnaClean Professional has been designed to retain, on average, a year's build-up of debris. Therefore, servicing is required once a year with the annual boiler service. If the system has a heavy debris build-up, or a power-flush was not carried out, we recommend cleaning the filter at appropriate intervals during the first year of installation and annually thereafter. It is simple to service the filter, following the instructions HERE.

Yes. You can use any chemical or acid agents on the market with MagnaClean Professional. The patented Pro-Fill air vent has been designed to allow installers to insert chemicals directly into the system as described HERE. Chemical dosing kits for this purpose are available to purchase through local plumbing merchants. Alternatively, remove the lid and use the canister as a dosing vessel.

MagnaClean Professional has been designed to last for the lifetime of the boiler, normally ten years. It provides continuous protection and comes with a two year limited warranty. Registering your warranty is straightforward and can be done online HERE

Simply turn the valves to the marked OFF position using the spanner provided. The valves rotate 360° in either direction.

IMPORTANT: Switch off the electrical supply to the boiler when servicing MagnaClean Professional.

We recommend installing MagnaClean Professional 28mm which has been designed for this purpose. MagnaClean Professional 28mm can also be installed on 22mm pipework where greater sludge capacity is required.

We recommend installing MagnaClean Professional 28mm which has been designed for this purpose. MagnaClean Professional 28mm can also be installed onto 22mm pipework where greater sludge capacity is required.

As with all magnetic products, if you have a pacemaker caution should be taken at all times when handling MagnaClean Professional. When MagnaClean Professional is installed, the magnetic field outside the canister is approximately one-tenth of an average fridge magnet.